Samsung SPH-M560BLASPR - Manual (Page 135)

Ca
me
ra
2I. Camera 119
Printing Pictures Using PictBridge
Your phone is PictBridge compatible, allowing you to
print directly from your phone without connecting to a
computer. Simply connect your phone to a PictBridge-
enabled printer and print your photos.
To print pictures directly from your phone:
1. Highlight and press > Photos > PictBridge .
2. Read the onscreen message and press NEXT (left
softkey).
3. Connect your phone to the PictBridge-enabled
printer by using a USB cable. (Wait until the
connection is completed.)
4. Read the Connect Printer message and press
NEXT (left softkey). The Select Folder pop-up appears
in the display. Select the folder location of the
image.
5. Highlight the desired image and press PRINT (left
softkey). (To select multiple images, press to
place a check mark next to each image selected.)
6. Set the printer settings using your navigation key.
Ⅲ Copies: to set the number of copies to print.
Ⅲ Type: to select a print type option:
● Borderless prints the standard image without a
border. Other printer may also display: 1-Up ,
2-Up , and 4-Up .
● Index prints the index information.
Ⅲ Paper Size : You can set the print size from Default or
4x6 . (Print sizes may vary according to the type of
printer you have.)
Ⅲ Date Print: You can imprint the date on your
pictures. Select On or Off . (Date stamping may not
be available depending on the type of printer you
have.)
Note Make sure your battery is fully charged before using
PictBridge.
Note These options may vary and are dependent on the
printer’s capabilities.
Note These sizes may vary and are dependent on the
printer’s capabilities.
Sprint M560.book Page 119 Tuesday, March 2, 2010 3:37 PM