Samsung SPH-M560BLASPR - Manual (Page 38)

22 2A. Phone Basics
Dialing Options
When you enter numbers in standby mode, you will
see a variety of dialing options displayed as softkeys on
the phone’s screen.
To send a message to the number, press SEND
MESSAGE (left softkey).
– or –
To initiate an option, press OPTIONS (right softkey), then
press the corresponding softkey.
ⅷ Contact Details: Displays the details for a Contact if the
entered number matches a previously created entry.
ⅷ Save: Enter a seven-digit or ten-digit number (phone
number and area code) and press OPTIONS (right
softkey) > Save to save the phone number in your
Contacts. (See “Saving a Phone Number” on
page 26.)
ⅷ Hard Pause: Enter digits and then use this feature to
enter a hard pause within a number string (the
phone waits for your input). To continue dialing,
you must press the key. (See “Dialing and
Saving Phone Numbers With Pauses” on page 27.)
ⅷ 2-Sec Pause: Enter digits and then use this feature to
enter a 2 second delay within a number string (the
phone continues dialing after 2 seconds without any
additional keys being pressed). (See “Dialing and
Saving Phone Numbers With Pauses” on page 27.)
Tip To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed
dial number is two digits, enter the first digit, and then
press and hold the second digit. (For information on
setting up speed dial numbers, see “Assigning
Speed Dial Numbers” on page 69.) (This feature will
not work when you are roaming off the Nationwide
Sprint Network; when roaming you must dial using
eleven digits [1 + the area code + the seven-digit
phone number].)
Sprint M560.book Page 22 Tuesday, March 2, 2010 3:37 PM