Horner APG QX651 OCS - Manual (Page 8)

PREFACE MAN0798-04-EN
August 20, 2009 Page 8 of 95 ECN # 979
VISUAL MAP OF MAJOR TASKS AND THE KEY CHAPTERS TO ASSIST YOU
The following map is provided to show you the major types of tasks needed to be performed and the key
chapters in this manual you need to refer to for information and help.
Directions: Major tasks are listed at the top of the map with the key chapters listed beneath that you
need to consult in order to perform the tasks.
FIRST STEP of ANY TASK: DATASHEET
Each QX and BP unit is sent with a datasheet in the box. The datasheet is the first document you
need to refer to for model-specific information related to QX and Back Pack models such as pin-
outs, jumper settings, and other key installation information. Visit our website (see page 92) to
obtain updates to datasheets and user documentation.
QUICK START INSTALLATION PROGRAMMING TROUBLESHOOTING
Safety / Compliance
page 9
Safety / Compliance
page 9
Safety / Compliance
page 9
Safety / Compliance
page 9
Introduction
page 11
Introduction
page 11
Introduction
page 11
Introduction
page 11
Mechanical Installation
page 17
System Settings
page 41
Maintenance
page 81
Electrical Installation
page 21
Cscape Configuration
page 69
Troubleshooting
page 89
CAN Comm
page 23
User Interface
page 53
Communication Options
page 25
Removable Media
page 25
High Speed I/O
page 35
Registers
page 63
Fail- Safe System
Page 71
Clone Unit
Page 81