Videotec ULISSE - Manual (Page 33)

EN - English - I
nstruc
tions manual
31
9.6.5 Polarity Menu
The following parameters can be set from the Polarity
menu:
01. Zoom: Allows the setting of the rotation polarity
of the lens Zoom motor.
02. Focus: Allows the setting of the rotation polarity
of the lens Focus motor.
03. Iris: Allows the setting of the rotation polarity of
the lens Iris motor.
POLARITY
------------------------
1>ZOOM : POSITIVE
2 FOCUS: POSITIVE
3 IRIS : POSITIVE
Fig. 67
9.6.6 Block Camera menu
01. Area titling: Allows access to the area titling
submenu.
02. Enabling: Enables masking of the relative zone.
03. Masking: Allows access to the dynamic masking
submenu.
04. Advanced: Allows access to the advanced
settings submenu of the SONY module.
BLOCK CAMERA
------------------------
1>ZONE TITLING >
2 MASKING >
3 ADVANCED >
Fig. 68
9.6.4 Housing Serial Port Menu
j Once you have exited from the camera
OSM, press the IRIS CLOSE key to return to
the Pan & Tilt OSM.
j To prevent the camera OSM from
overlapping the Pan & Tilt OSM, exit from
the camera configuration mode before
pressing the IRIS CLOSE key.
01. Protocol: Allows the setting of the protocol
used for the serial communication with the
camera.
02. Baud Rate: Allows the setting of the baud rate
used for the serial communication with the
camera.
03. Return Cmd: Allows the personalization of
the Confirm command ("9.1.1 How to use the
joystick", page 25) for na
vigating inside the
camera OSM.
04. Exit Cmd: Allows the personalization of the
Exit command ("9.1.1 How to use the joystick",
page 25) for na
vigating inside the camera
OSM.
05. Enable Camera OSM: Allows access to the
camera configuration mode.
HOUSING SERIAL PORT
------------------------
1>PROTOCOL : NONE
2 BAUDRATE : 9600
3 RETURN CMD: IRIS CLOSE
4 EXIT CMD : IRIS OPEN
5 ENABLE CAMERA OSM >
Fig. 66