D.7 logging and transmitting to a serial port – Triton Isis User Manual
Page 70
June 2004 Isis® Sonar User's Manual, Volume 2
60
The CD message is comma-delimited, terminated with the line-feed character
(ASCII 012), and is transmitted as follows:
CD,ccc,dd MMM 19yy,hh:mm:ss,ee.e,nn.n,hh.h,rr,tt,ff,vol,file,pp
D.7 Logging and Transmitting to a Serial Port
If you have Isis in Record mode, logging can now be controlled via a serial port.
To log to any serial port and transmit:
1. In Isis, turn on serial port (File→Record Setup→Serial Port Setup).
2. From the remote system, transmit either of the following strings:
START_LOGGING {optional file name} to begin data logging.
Isis will create a file name if none is supplied. If you don’t provide
a path name, Isis uses the path specified in the
Configure→Hypack DDE dialog box.
STOP_LOGGING to stop logging but continue displaying data.
Appendix D: Serial Interfaces