Vaisala HMM100 - Manual (Page 51)

Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 49
Restore Saved Settings
Use the RESTORE command to restore saved settings to the module.
All unsaved changes will be lost.
RESTORE
Example:
>restore
Restoring default settings...done
>
Reset the Module
Use the RESET command to reset the module. Upon reset or power-up,
the module? enters the serial mode that has been set with the SMODE
command.
RESET
Example (module set to serial mode STOP, will output module software
version at reset):
>reset
HMM100 / VAISALA / 1.1.10.3031
>
Restore Factory Settings
Use the FRESTORE command to restore the factory settings to the
module. All user settings, including the analog output mode and user-
performed calibration corrections, will be lost. The module will revert
back to the factory calibrated settings.
FRESTORE
Example:
>frestore
Restoring factory defaults...done
>