Vaisala HMM100 - Manual (Page 35)

Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 33
Example (analog output in error state, output quantity RH, analog output
mode 0 ... 10V):
>status
Channel 0:
Status : ERROR
Notification : ON
Level Lo : 0
Level Hi : 100
Error level : 0.000000
Show Firmware Version
VERS
Example:
>vers
HMM100 / HM100 / VAISALA / 1.1.10.3031
>
Serial Line Output Commands
Start Measurement Output
Use the R command to start the continuous outputting of measurement
values as an ASCII text string to the serial line. The output always
includes the readings of the currently selected analog output quantity
(RH or Td) and temperature. The format is fixed.
R
Example:
>r
RH= 25.10% T= 24.77'C
RH= 25.12% T= 24.96'C
RH= 25.17% T= 25.20'C
…
Outputting the results continues in intervals issued with the command
INTV. You can stop the output by entering the S command.
Stop Measurement Output
Use the S command to stop the continuous measurement output:
S