Vaisala HMM100 - Manual (Page 49)

Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 47
Other Commands
Display Command List
Use the HELP command to display a list of the currently available
commands. If the PASS command has not been used, only the basic
commands are available.
HELP
Enable Advanced Commands
Use the PASS command to enable the advanced commands.
PASS [passcode]
where
passcode
= Use "1300" to enable the advanced commands.
Example:
>pass 1300
>
Display the Currently Active Errors
Use the ERRS command to display the currently active error codes. For
troubleshooting active errors, see Table 9 on page 62.
ERRS
Example (no active errors):
>errs
No errors.
>