Outback Power Systems VFX Series Programming Manual - Manual (Page 40)

39
Ranking the Slaves
• Start from the last ADV/FX/STACK screen.
ADV/FX/STACK---------P02
power save level 1
slave adjust only
DOWN INC DEC PORT
ADV/FX/STACK-----------P04
power save level 1
slave adjust only
DOWN INC DEC PORT
ADV/FX/STACK----------P04
stack OB Slave L1
phase
DOWN INC DEC PORT
Press the soft key until
P02 is displayed. This menu
pertains to the Slaves only. The
default setting should be 1 which
is the 1st rank Slave. If necessary,
press the or soft
keys to make it 1. Press the soft key 2
times to the power save level slave
adjust only menu. Press the soft key
until P03 is displayed.
ADV/FX/STACK---------P04
power save level 2
slave adjust only
DOWN INC DEC PORT
ADV/FX/STACK---------P03
power save level 2
slave adjust only
DOWN INC DEC PORT
ADV/FX/STACK---------P03
power save level 2
slave adjust only
DOWN INC DEC PORT
Press the soft key to
change the power save level Slave
adjust only to 2 which is the 2nd
rank slave. Press the soft key until
P04 is displayed. Press the soft key until the
setting is 3 for 3rd rank Slave.
ADV/FX/STACK---------P04
power save level 3
slave adjust only
DOWN INC DEC PORT
The Slaves are now ranked. Any remaining Slaves can be ranked in
the same fashion. When fi nished ranking the Slaves, remain in this
screen for the next procedure