Outback Power Systems VFX Series Programming Manual - Manual (Page 10)

9
ADVANCED SCREENS
All the FX operation settings can be adjusted in the MATE’s ADVANCED screens, including some previ-
ously discussed in the INPUT and SETUP menus. Changing the settings under any menu will aff ect the
values in all menus. The ADVANCED screens are accessed via the password
141
.
Push any soft key on the ADV/
SETTINGS/WARNING screen and go
to the ADV/PASSWORD screen.
MAIN--------------------------
12:12:16A
SUM STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could adversely aff ect
system performance
The screen displays <132>. Press the
button until it scrolls to the
password 141.
ADV/PASSWORD----------------
enter the password
132
ENTER INC DEC EXIT
ADV/PASSWORD----------------
enter the password
141
ENTER INC DEC EXIT
ADV
choose device:
FX CC DC MATE
ADV/FX/PAGE 1-----------------
choose category:
ADV INV CHGR PG2
ADV/FX/PG2---------------------
choose category:
PG1 GRID GEN PG3
ADV/FX/PAGE3------------------
choose category:
PG2 AUX STACK PG4
ADV/FX/PAGE4------------------
choose category:
PG3 SELL CAL MAIN
Pressing the
The FX settings and their adjustments include:
• INV—INVERTER
• CHGR—CHARGER
• GRID—AC input if the FX input is set to GRID
• GEN—AC input if the FX input is set to GEN
• AUX—AUX OUTPUT
• STACK—Master and Slave designations when multiple FXs are in use
• SELL—Grid-Interactive FX operations
• CAL—Adjusts voltage calibration measurements for improved operation