Outback Power Systems VFX Series Programming Manual - Manual (Page 13)

12
ADV/FX/INVERTER-------------
reset FX to factory
defaults
DOWN MORE
ADV/FX/INVERTER-------------
inverter programming
completed
TOP ADV MAIN
Pressing returns to the beginning of the
ADV/FX/INVERTER menu.
returns to the ADVANCED screens and
displays the MAIN screen.
MORE
NEXT DOWN
TOP
ADV
MAIN
PORT
1
To reset to factory defaults, press
if a HUB is used until the
chosen port number appears
or press if this is a single
FX system.
To complete the reset, press
and then .
Press to exit the INVERTER
screens.
Use this screen to reset the FX to its factory
default set points. This will cause all previous
programming changes to be lost. Press to
choose the HUB port whose FX is to be reset and
then press or, if no HUB is in use, press
.Press to skip resetting to factory
defaults.
ADV/FX/INVERTER--P00
choose fx port
then press next
EXIT PORT NEXT
ADV/FX/INVERTER----P00
press button
Ready
EXIT 1 2
ADV/FX/INVERTER--P00
press button 2
Ready
EXIT 1 2
ADV/FX/INVERTER--P00
press button 2
Done
EXIT 1 2
PORT
NEXT
EXIT
2