Ag Leader PF3000Pro Harvest & Application Operators Manual - Manual (Page 15)

PF3000 Pro Setup Overview
Ag Leader Technology
July 2003 2-1
Important Notices The PF3000 Pro must be set up before field operation, but before you begin
the setup procedures, read the following notices:
•
The PF3000 Pro is a software upgradeable monitor. Ag Leader
Technology will periodically offer free operating program upgrades to
increase the capabilities of the PF3000 Pro. To receive the program
upgrade, you must send in the registration form found at the
beginning of the operator’s manual.
•
If you plan to make yield maps on your own computer, you will need to
use a mapping program that can process files created by the PF3000 Pro.
Section Contents This setup section contains instructions for the following items. The
operating modes that the instructions pertain to are also listed.
Item Operating Mode Page
Console Setup All 2-6
Card Setup All 2-8
Creating, Naming Fields and Loads All 2-12
Marker Setup All 2-17
GPS Setup All 2-19
Vehicle Setup Harvest 2-30
Grain Setup Harvest 2-34
Swath Setup Harvest 2-39
Swath Setup Site Verification 2-41
Vehicle Site Verification 2-42
Controller Setup Application Rate 2-44
Raven Controller ( with Serial Ports) Application Rate 2-44
Mid-Tech Controller Application Rate 2-49
DICKEY-john Land Manager Application Rate 2-55
DICKEY-john Seed Manager Application Rate 2-61
Rawson Accu-Rate/Accu-Plant Application Rate 2-65
New Leader Mark III/Mark IV Application Rate 2-73
Flexicoil Flexcontrol Application Rate 2-79