HP StorageWorks 1000i Virtual Library System - Manual (Page 60)

Figure 49 Log off sessions
3. Click the box under Identifier, as shown in Figure 49 . Click Log off. The system will attempt to log off
the current target’s session. If there is currently activity on this session, you will get a message saying
“The session cannot be logged out since a device on that session is currently being used.” If you
receive this message, either wait until the activity finishes or cancel the activity. Repeat steps and
Step 3 to log off all connected targets.
4. On the Support tab under Maintenance, click Shut Down/Restart. On the Shut Down/Restart
page (see Figure 50 ), click Shut Down.
Figure 50 Shut Down/Restart page
5. When the confirmation message appears, click OK to continue.
60 Working with the VLS1000i