Isa non-plug-and-play boards (optional) – HP Netserver L Server series User Manual
Page 84
Chapter 10
Configuring the NetServer
76
During system start-up or reset, when the message
Press
Utility
appears, press the CTRL and C keys at the same time.
Use the arrow keys to move the cursor, press ENTER to select an option, and
press ESC to exit.
1. To change adapter settings:
•
Select an adapter from the list in the Main Menu
•
Select "Adapter Setup". This option configures the SCSI ID setting
and other advanced adapter settings.
2. To format a hard disk or change hard disk parameters:
•
Select an adapter from the list in the Main Menu
•
Select "Device Selections"
•
Select the hard disk to format
•
Select "format" menu option
For more details, including default settings, refer to Information Assistant on the
HP NetServer Online Documentation CD-ROM.
ISA Non-Plug-and-Play Boards (Optional)
Reserving Resources for ISA Non-Plug-and-Play Boards
If you have installed an ISA non-Plug-and Play accessory board, you must
reserve system resources for it. Turn on the monitor and the NetServer, and start
the Setup utility by pressing the F2 key when
Press
appears on the boot screen.