HP Netserver L Server series - Manual (Page 32)

Chapter 5 Installing Additional Memory
24
Figure 5-4. Removing System Board From LH 3r
3. Position the system board flat and component side up on an anti-static
surface. Ensure that the corner clears the table surface, as shown in
Figure 5-5.
Figure 5-5. Installing DIMMs in System Board
4. Install the DIMMs (see Figures 5-2, 5-3, and 5-5):
a. Remove a DIMM from its container, handling the module by its edges.
Lay it on an anti-static surface.