beautypg.com

Type 2--locating and mounting the slides – HP Netserver L Server series User Manual

Page 60

background image

Chapter 8

Mounting the NetServer in a Rack

52

Type 2--Locating and Mounting the Slides

Type 2--Locating the Slides

For Type 2, see Figure 8-9. The two front mounting brackets attach behind the
outside faces of the front columns. The rear attachments for the slides in this case
attach by means of a threaded stud and hex nut to the inside faces of the rear
columns. Locate the hole for this stud using the template or by counting up 21
holes from the unit below.

Figure 8-9. Location of Slides for Type 2

Type 2--Mounting the Slides

Once you have marked the locations of the slides, attach them to the rack. For the
"Type 2" Rack, follow these steps to mount the slides:

See also other documents in the category HP Computer hardware: