HP Netserver L Server series - Manual (Page 82)

Chapter 10 Configuring the NetServer
74
•
Easy linkage with leading management platforms, including HP
OpenView Network Node Manager and Workgroup Node Manager
•
Support for DMI 2.0, which provides the same Desktop Management
Interface inventory information for NetServers as for desktop PCs
TopTools is included with every NetServer L series server and should be installed
to help your service provider troubleshoot your system. TopTools is located on
HP NetServer Navigator CD-ROM versions G.01.50 and later G versions, as well
as L.10.00 and later L versions.
•
See the HP NetServer Management Reference Guide for detailed
installation instructions.
•
You can also download the TopTools software and documentation from
the NetServer Web Site at
http://www.hp.com/go/netserver_mgmt
Integrated Remote Assistant
Integrated Remote Assistant is a separate management controller built into the
NetServer. It enables remote modem-based server management and alerting
through a pager for improved remote administration of your NetServer.
Integrated Remote Assistant provides:
•
Console redirection, independent of server state
•
Access regardless of system state for troubleshooting and problem
resolution
•
Pager notification of critical server events to alert you earlier to problems
•
Access to the server event log
•
Server reset and power control
•
Remote system BIOS update
•
Password and dial-back security
•
Remote management capabilities enhanced with pcANYWHERE-32,
providing full remote control of Microsoft Windows NT servers across the
network or over a modem connection
See the HP NetServer Remote Administrator Guide for details.