HP Netserver L Server series - Manual (Page 66)

Chapter 8 Mounting the NetServer in a Rack
58
5. Let the NetServer rest on its handles while you line up the mounting holes
in the top of the HP NetServer LH 3r chassis with the screw holes in the
slides. See Figure 8-14.
6. Insert all three screws on each side through the slide members and into
the sides of the HP NetServer LH 3r, so that the slides are securely
fastened to the server. See Figure 8-14.
Figure 8-14. Insert Screws through Slides into Server Chassis