HP Netserver L Server series - Manual (Page 18)

Chapter 3 Removing and Replacing Covers
10
Cover 1
Cover 2
Cover 3
Figure 3-2. HP NetServer LH 3r Covers
WARNING Before removing covers, always disconnect the power cord
and unplug telephone cables. Disconnect the power cord to
avoid exposure to high energy levels that may cause burns
when parts are short-circuited by metal objects, such as tools
or jewelry. Disconnect telephone cables to avoid exposure to
shock hazard from telephone ringing voltages.
Note that the power switch does not turn off the standby
power. Disconnect the power cord to turn off standby power.
If the backlight on the LCD display is on, standby power is
on.
CAUTION Wear a wrist strap and use a static-dissipating work surface
connected to the chassis at all times.
Removing the HP NetServer LH 3 Covers
To remove the covers, first unlock the bezel, using the supplied key, and remove
it from the front of the NetServer.