HP Netserver L Server series - Manual (Page 49)

41
8 Mounting the NetServer in a Rack
Prevent Rack Tip-Over, Equipment Damage and
Injury
WARNING To prevent the rack from tipping over, extend the anti-tip
foot from under the front of the enclosure prior to
mounting any components. See Figure 8-12. Also lower the
leveler feet at the four corners of the rack to improve stability
and prevent the rack from rolling away as devices are inserted
into their rack mounts. Failure to use the anti-tip foot and
leveler feet could result in serious injury.
CAUTION The HP NetServer LH 3r weighs up to 160 pounds (73 kg.)
when fully loaded. Take out power supplies and hot-swap
hard disk drives before lifting the NetServer into the rack.
CAUTION Use two people when moving the NetServer or lifting it into
the rack.