HP Netserver L Server series - Manual (Page 31)

Chapter 5 Installing Additional Memory
23
Figure 5-3. Inserting DIMM Into Connector
3. Repeat step 2 to install all of the DIMMs for your memory
configuration.
4. If you are not installing any other accessories, replace cover 3. (See
Chapter 3, "Removing and Replacing the Covers.")
Installing Additional Memory in the LH 3r
1. Remove the NetServer's cover 2 (see Chapter 3, "Removing and Replacing
the Covers.")
2. Remove the system board by raising the retaining latches to disengage it
from the socket, then pull it out until it clears the chassis guides. (See
Figure 5-4.)