Set resolution settings – HP LaserJet M1319f Multifunction Printer User Manual
Page 99
The default light/dark setting is the contrast that is normally applied to items that are being faxed. The
slider is set to the middle as the default setting.
1.
On the control panel, press
Setup
.
2.
Use the arrow buttons to select Fax setup, and then press
OK
.
3.
Use the arrow buttons to select Fax Send setup, and then press
OK
.
4.
Use the arrow buttons to select Def. Light/dark, and then press
OK
.
5.
Use the
<
button to move the slider to the left to make the fax lighter than the original, or use the
>
button to move the slider to the right to make the fax darker than the original.
6.
Press
OK
to save the selection.
Set resolution settings
NOTE:
Increasing the resolution increases the fax size. Larger faxes increase the send time and could
exceed the available memory in the product.
The factory-set default resolution setting is Fine.
Use this procedure to change the default resolution for all fax jobs to one of the following settings:
●
Standard: This setting provides the lowest quality and the fastest transmission time.
●
Fine: This setting provides a higher resolution quality than Standard that is usually appropriate for
text documents.
●
Superfine: This setting is best used for documents that mix text and images. The transmission
time is slower than Fine but faster than Photo.
●
Photo: This setting produces the best images, but greatly increases the transmission time.
Set the default resolution setting
1.
On the control panel, press
Setup
.
2.
Use the arrow buttons to select Fax setup, and then press
OK
.
3.
Use the arrow buttons to select Fax Send setup, and then press
OK
.
4.
Use the arrow buttons to select Def. Resolution, and then press
OK
.
5.
Use the arrow buttons to change the resolution setting.
6.
Press
OK
to save the selection.
Set the resolution for the current fax job
1.
On the control panel, press
Resolution
to show the current resolution setting.
2.
Use the arrow buttons to select the appropriate resolution setting.
3.
Press
OK
to save the selection.
ENWW
Change fax settings
89