Set autoredial, Set light/dark and resolution, Set the default light/dark (contrast) setting – HP LaserJet M1319f Multifunction Printer User Manual
Page 98
Set autoredial
If the product was unable to send a fax because the receiving fax machine did not answer or was busy,
the product attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-on-
communication-error options. Use the procedures in this section to turn these options on or off.
Set the redial-on-busy option
If this option is turned on, the product redials automatically if it receives a busy signal. The factory-set
default for the redial-on-busy option is On.
1.
On the control panel, press
Setup
.
2.
Use the arrow buttons to select Fax setup, and then press
OK
.
3.
Use the arrow buttons to select Fax Send setup, and then press
OK
.
4.
Use the arrow buttons to select Redial if busy, and then press
OK
.
5.
Use the arrow buttons to select On or Off, and then press
OK
.
Set the redial-on-no-answer option
If this option is turned on, the product redials automatically if the receiving machine does not answer.
The factory-set default for the redial-on-no-answer option is Off.
1.
On the control panel, press
Setup
.
2.
Use the arrow buttons to select Fax setup, and then press
OK
.
3.
Use the arrow buttons to select Fax Send setup, and then press
OK
.
4.
Use the arrow buttons to select Redial-no answer, and then press
OK
.
5.
Use the arrow buttons to select On or Off, and then press
OK
.
Set the redial-on-communication-error option
If this option is turned on, the product redials automatically if some sort of communication error occurs.
The factory-set default for the redial-on-communication-error option is On.
1.
On the control panel, press
Setup
.
2.
Use the arrow buttons to select Fax setup, and then press
OK
.
3.
Use the arrow buttons to select Fax Send setup, and then press
OK
.
4.
Use the arrow buttons to select Redial Comm Err., and then press
OK
.
5.
Use the arrow buttons to select On or Off, and then press
OK
.
Set light/dark and resolution
Set the default light/dark (contrast) setting
The contrast affects the lightness and darkness of an outgoing fax as it is being sent.
88
Chapter 10 Fax
ENWW