HP LaserJet M1319f Multifunction Printer - Manual (Page 157)

Avoid repeated jams
● Verify that the input tray is not overfilled. The input tray capacity varies depending on the type of
print media that you are using.
● Verify that the media guides are properly adjusted.
● Check that the input tray is securely in place.
● Do not add print media into the input tray while the product is printing.
● Use only HP-recommended media types and sizes. See Paper and print media on page 35 for
more information about print media types.
● Do not fan media prior to loading it in a tray. To loosen the ream, hold it firmly in both hands and
twist the media by rotating your hands in the opposite direction.
● Do not let print media stack up in the output bin. The print media type and the amount of toner used
affect the output bin capacity.
● Check the power connection. Make sure that the power cord is firmly connected to both the product
and the power supply box. Plug the power cord into a grounded power outlet.
● Make sure that the ADF media lever is set correctly for single-page or multiple-page documents.
● To prevent damage to the product, do not use an original that contains correction tape, correction
fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals into
the ADF.
ENWW Clear jams 147