HP LaserJet M1319f Multifunction Printer - Manual (Page 143)

Specks Smearing
1. Press Setup .
2. Use the arrow buttons to find the Service menu, and then press OK .
3. Use the arrow buttons to find Cleaning mode, and then press OK .
4. Load plain letter or A4 paper when you are prompted.
5. Press OK again to confirm and begin the cleaning process.
A page feeds through the product slowly. Discard the page when the process is completed.
Clean the exterior
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the exterior of the product.
Firmware updates
Firmware updates and installation instructions for this product are available at www.hp.com/support/
ljm1319 . Click Downloads and drivers, click the operating system, and then select the firmware
download for the product.
ENWW Manage supplies 133