Set the handset volume, Send fax settings, Set a dial prefix – HP LaserJet M1319f Multifunction Printer User Manual
Page 97: Set the dial-tone detection
Set the handset volume
1.
Press
Setup
.
2.
Use the arrow buttons to select System setup, and then press
OK
.
3.
Use the arrow buttons to select Volume settings, and then press
OK
.
4.
Use the arrow buttons to select Handset volume, and then press
OK
.
5.
Use the arrow buttons to select Off, Soft, Medium, or Loud.
6.
Press
OK
to save the selection.
Send fax settings
Set a dial prefix
A dial prefix is a number or group of numbers that are automatically added to the beginning of every fax
number you enter at the control panel or from the software. The maximum number of characters for a
dial prefix is 50.
The default setting is Off. You might want to turn this setting on and enter a prefix if, for example, you
have to dial a number such as 9 to get a telephone line outside of your company telephone system.
While this setting is activated, you can dial a fax number without the dial prefix by using manual dial.
For instructions, see
Manual dial faxing on page 101
.
1.
On the control panel, press
Setup
.
2.
Use the arrow buttons to select Fax setup, and then press
OK
.
3.
Use the arrow buttons to select Fax Send setup, and then press
OK
.
4.
Use the arrow buttons to select Dial Prefix, and then press
OK
.
5.
Use the arrow buttons to select On or Off, and then press
OK
.
6.
If you selected On, use the alphanumeric buttons to enter the prefix, and then press
OK
. You can
use numbers, pauses, and dialing symbols.
Set the dial-tone detection
Normally, the product begins dialing a fax number immediately. If you are using the product on the same
line as your telephone, turn on the detect-dial-tone setting. This prevents the product from sending a
fax while someone is on the telephone.
The factory-set default for detect dial tone is On for France and Hungary, and Off for all other countries/
regions.
1.
On the control panel, press
Setup
.
2.
Use the arrow buttons to select Fax setup, and then press
OK
.
3.
Use the arrow buttons to select Fax Send setup, and then press
OK
.
4.
Use the arrow buttons to select Detect dial tone, and then press
OK
.
5.
Use the arrow buttons to select On or Off, and then press
OK
.
ENWW
Change fax settings
87