HP LaserJet M1319f Multifunction Printer - Manual (Page 106)

Make an extension telephone available to receive faxes
With this setting turned on, you can alert the product to pick up the incoming fax call by pressing 1-2-3
sequentially on the telephone keypad. The default setting is On. Turn this setting off only if you use
pulse dialing or if you have a service from your telephone company that also uses the 1-2-3 sequence.
The telephone company service does not work if it conflicts with the product.
1. On the control panel, press Setup .
2. Use the arrow buttons to select Fax setup, and then press OK .
3. Use the arrow buttons to select Fax Recv. setup, and then press OK .
4. Use the arrow buttons to select Extension Phone, and then press OK .
5. Use the arrow buttons to select On or Off, and then press OK to save the selection.
96 Chapter 10 Fax ENWW