Change fax settings, Set the sound-volume settings, Set the alert volume – HP LaserJet M1319f Multifunction Printer User Manual
Page 96: Set the fax-sounds (phone-line) volume, Set the ring volume
Change fax settings
Set the sound-volume settings
Control the volume of the fax sounds from the control panel. You can make changes to the following
sounds:
●
The fax sounds that are associated with incoming and outgoing faxes
●
The ring for incoming faxes
The factory-set default for the fax-sounds volume is Soft.
Set the alert volume
1.
Press
Setup
.
2.
Use the arrow buttons to select System setup, and then press
OK
.
3.
Use the arrow buttons to select Volume settings, and then press
OK
.
4.
Use the arrow buttons to select Alarm volume, and then press
OK
.
5.
Use the arrow buttons to select Off, Soft, Medium, or Loud.
6.
Press
OK
to save the selection.
Set the fax-sounds (phone-line) volume
Complete the following steps to change the fax-sounds volume.
1.
Press
Setup
.
2.
Use the arrow buttons to select System setup, and then press
OK
.
3.
Use the arrow buttons to select Volume settings, and then press
OK
.
4.
Use the arrow buttons to select Phoneline volume, and then press
OK
.
5.
Use the arrow buttons to select Off, Soft, Medium, or Loud.
6.
Press
OK
to save the selection.
Set the ring volume
When the product is initially receiving a call, a ring alert is audible. The ring duration length is based on
the local telephone company ring-pattern length. The factory-set default for the ring volume is Soft.
1.
Press
Setup
.
2.
Use the arrow buttons to select System setup, and then press
OK
.
3.
Use the arrow buttons to select Volume settings, and then press
OK
.
4.
Use the arrow buttons to select Ring volume, and then press
OK
.
5.
Use the arrow buttons to select Off, Soft, Medium, or Loud.
6.
Press
OK
to save the selection.
86
Chapter 10 Fax
ENWW