HP StorageWorks 1000 Modular Smart Array User Manual
Page 58

Controller Display Messages
58
412 STORAGE BOX
#
RESPONDING
Error
The specified storage
enclosure is not responding
to commands.
Insure the storage box is
powered on. Insure all
cables are connected
securely. Power of the
MSA1000 and the storage
box. Power on the storage
box first and then the
MSA1000.
Should the issue persist,
please contact HP support.
413 STORAGE BOX
#
Informational
The version of the firmware
running on the EMU. This is
only displayed for the
internal EMU of the
MSA1000. It is not
displayed for externally
connected storage boxes.
415 STORAGE BOX
#2 OR #3 HOT
ADDED
Informational
A HP StorageWorks SCSI
expansion storage
enclosure has been
hot-added to the
MSA1000.
500 INITIALIZING
PCI SUBSYSTEM
Informational
The array controller’s PCI
subsystem is being
initialized as part of the
power up sequence.
501 PCI
SUBSYSTEM
HARDWARE FAILURE
Error
The array controller’s PCI
subsystem has encountered
a critical error during the
power up sequence.
Remove the failed array
controller, wait 10 seconds,
and then reinsert the array
controller insuring that it is
fully seated in the chassis.
Should the issue persist
please contact HP support.
502 PCI BRIDGE
ASIC SELF TEST
FAILURE
Error
The array controller’s PCI
bridge ASIC has
encountered a critical error
during the power up
sequence.
Remove the failed array
controller, wait 10 seconds,
and then reinsert the array
controller insuring that it is
fully seated in the chassis.
Should the issue persist
please contact HP support.
Table 3: LCD Message Descriptions
Message
Type
Description
Action