HP StorageWorks 1000 Modular Smart Array - Manual (Page 55)

Controller Display Messages
55 MSA1000 Controller User Guide
306 FIRMWARE
FLASH STARTED
Informational Indicates that the array
controller in the MSA1000
has started the firmware
flash process. Do not turn
off power to the system until
it has completed. This could
take several minutes.
307 FIRMWARE
FLASH DONE
Informational Indicates that the array
controller in the MSA1000
has completed the firmware
flash process. It is now safe
to turn off power to the
system.
308 FIRMWARE
FLASH FAILED
Error Indicates that the array
controller in the MSA1000
has failed the firmware
flash process.
Attempt the flash process
again.
Should the issue persist,
please contact HP support.
309 EMU FLASH
STARTED
Informational Indicates that the EMU in
the MSA1000 has started
the firmware flash process.
Do not turn off the power to
the system until it has
completed. This could take
five minutes.
310 EMU FLASH
DONE
Informational Indicates that the EMU in
an MSA1000 has
completed the firmware
flash process. It is now safe
to turn off power to the
system.
311 EMU FLASH
FAILED
Error Indicates that the EMU in
an MSA1000 has failed
the firmware flash process.
Attempt the flash process
again.
Should the issue persist,
please contact HP support.
400 STORAGE BOX
# FAN OK
Informational The specified storage
enclosure indicates that one
of its fans which previously
had been failed or
degraded is now operating
normally.
Table 3: LCD Message Descriptions
Message Type Description Action