HP StorageWorks 1000 Modular Smart Array - Manual (Page 56)

Controller Display Messages
56 MSA1000 Controller User Guide
401 STORAGE BOX
# FAN FAILED
Error The specified storage
enclosure indicates that one
of its fans has failed. The
storage enclosure and any
devices in it may now be
susceptible to overheating
if corrective action is not
taken.
Check all fans and insure
they are operating. Any
failed fans should be
replaced.
402 STORAGE BOX
# FAN
DEGRADED
Error The specified storage
enclosure indicates that one
of its fans is not operating
at full efficiency. The fan
may eventually fail.
Check all fans and insure
they are operating. Any
failed fans should be
replaced.
403 STORAGE BOX
# FAN HOT
INSERTED
Informational The specified storage
enclosure indicates that a
fan has been added.
404 STORAGE BOX
# FAN HOT
REMOVED
Informational The specified storage
enclosure indicates that a
fan has been removed.
405 STORAGE BOX
# TEMPERATURE
OK
Informational The temperature sensor in
the storage enclosure
indicates that the
temperature is now back in
the normal operating
range.
406 STORAGE BOX
# OVERHEATING
Error The temperature sensor in
the storage enclosure
indicates that the enclosure
is starting to exceed the
normal operating range.
Check all fans and insure
they are operating. Any
failed fans should be
replaced. Insure that there
are drive blank cartridges
in any empty drive bays in
the enclosure. If the
enclosure is an MSA1000
and only one array
controller is inserted, insure
that there are cover plates
installed in the empty array
controller bay and the fibre
bay in the chassis.
Table 3: LCD Message Descriptions
Message Type Description Action