Viewing detailed volume and pair information – HP StorageWorks XP Remote Web Console Software User Manual
Page 84

Guide. For information about XP Thin Provisioning, see the HP StorageWorks XP24000 Thin
Provisioning Software User's Guide.
• Emulation: The emulation type of the P-VOL and S-VOL.
• Capacity(MB): The volume capacity displayed in megabytes (MB).
• CLPR(P): The cache logical partition of the P-VOL.
• CLPR(S): The cache logical partition of the S-VOL.
•
The OK button adds the operation settings to suspend the selected pairs displayed in the Pairsplit-S
Volume List to the Preview List on the Pair Operation window.
Note:
You must click Apply on the Pair Operation window to apply the Pairsplit-S operation
displayed in the Preview List to the storage system.
•
The Cancel button cancels the operations set in the Pairsplit-S dialog box and closes the dialog
box.
To delete Business Copy pairs, follow the procedure below:
1.
To synchronize the P-VOL and S-VOL before deleting the pair:
a.
Wait until all write I/Os to the P-VOL are complete.
b.
Set the P-VOL offline from the host server to prevent the P-VOL from being updated during
or after the Pairsplit-S operation.
c.
After the P-VOL is offline, suspend the pair to copy all pending updates to the S-VOL. When
the pair status changes to PSUS, the P-VOL and S-VOL are synchronized.
2.
Go to the Pair Operation window, and select the desired port or host group in the Tree to
filter the volumes displayed in the Volume List.
3.
Select the pairs you want to delete, right-click while selecting the pairs, and then select the Delete
command from the pop-up menu that appears by right-clicking.
The Pairsplit-S dialog box will be displayed.
4.
On the Pairsplit-S dialog box, select the pairs you want to delete, and click OK to reflect the
settings to the Preview List on the Pair Operation window.
Note:
To remove a pair in the Pairsplit-S Volume List, select and right-click the pair you want to
delete, and then select the Delete command in the pop-up menu.
5.
On the Pair Operation window, click Apply to delete the specified pairs or volumes.
The Pairsplit-S operation settings displayed in the Pairsplit-S dialog box will be applied to the
storage system and the Pair Operation window will display the results of the Pairsplit-S operations.
Viewing Detailed Volume and Pair Information
The Detail dialog box (see
on page 85) displays information such as emulation types or
status of the selected volume or pair.
To display the Detail dialog box:
1.
Select a volume or a Business Copy pair from the Volume List of the Pair Operation window.
2.
Right-click the selected volume or pair.
A pop-up menu will be displayed.
3.
Select the Detail command from the pop-up menu.
The Detail dialog box will be displayed.
Notes:
•
If the P-VOL of the selected pair has two or more S-VOLs that share the same P-VOL, all S-VOLs
are displayed on the Detail dialog box.
•
If you select the Detail command when you are selecting an XP Snapshot pair, the displayed
Detail dialog box will be different from that of displayed when you select a Business Copy pair.
For details, see the HP StorageWorks XP24000 Snapshot User’s Guide.
84
Performing Business Copy Operations