Deleting pairs, 35 pairsplit-s dialog box, Figure 35 – HP StorageWorks XP Remote Web Console Software User Manual

Page 83

Deleting Pairs

The Pairsplit-S dialog box (see

Figure 35

on page 83) allows you to delete the pairs. Note that the

Pairsplit-S is an operation to stop copying data into the S-VOL of a Business Copy pair, and set the status

of the P-VOL and S-VOL back to SMPL volumes.

Figure 35 Pairsplit-S Dialog Box

The Pairsplit-S dialog box consists of the following components.

•

Pairsplit-S Volume List

The Volume List located on the upper side of the Pairsplit-S dialog box displays the following

information pertaining to the P-VOL and S-VOL of the pair you want to delete:
• P-VOL: Information about P-VOL is displayed in AAA-BB-CCC(XX:YY:ZZ) format.

• AAA: The port ID (cluster and channel number)
• BB: The group number of host group
• CCC: LU number
• XX:YY:ZZ: LDKC number:CU number:LDEV number

Note:

An LDEV number that ends with a # mark indicates that the LDEV is an external volume

(for example, 00:00:01#). An LDEV number that ends with a letter X indicates that the LDEV is

a virtual volume used by XP Thin Provisioning (for example, 00:00:01X). For details regarding

the external volumes, see the HP StorageWorks XP24000 External Storage Software User’s

Guide. For information about XP Thin Provisioning, see the HP StorageWorks XP24000 Thin

Provisioning Software User's Guide.

• MU: The MU number of the P-VOL.
• Status: The status of the P-VOL.
• S-VOL: Information about S-VOL is displayed in AAA-BB-CCC(XX:YY:ZZ) format.