HP 12000 Virtual Library System EVA Gateway User Manual
For vls firmware 6.1.0
Table of contents
Document Outline
- HP 12200 Gateway Virtual Library System User Guide
- Contents
- 1 Introduction
- 2 Hardware Installation
- Preparing for the Installation
- Unpacking
- Removing the Packing Materials
- Rack Planning Resources
- Rack Requirements
- Rack Warnings
- Identifying the VLS Shipping Carton Contents
- Installing the VLS Node into a Rack
- Cabling the VLS Node
- Installing the Ethernet Switches 6600 into a Rack
- Cabling Ethernet Switches 6600–24G
- 3 Multi-node Setup
- 4 Storage Configuration
- 5 Automigration/Replication
- Understanding Automigration Concepts
- Connecting a Destination Library
- Managing and Unmanaging a Destination Library
- Echo Copy Pool Operations
- Creating an Echo Copy Pool
- Creating Virtual Tapes
- Restoring from a SAN Physical Cartridge
- Restoring from a LAN/WAN Virtual Cartridge
- Loading Blank Media into an Echo Copy Pool
- Loading Media into an Echo Copy Pool for Overwrite
- Restarting a Broken Mirror
- Viewing Cartridges in Automigration Source Libraries
- Viewing Automigration Cartridges in the Firesafe
- Editing Copy Pools
- SAN Destination Library Operations
- Monitoring Destination Library Status
- Forcing a Replication Job
- Placing a Library Offline or Online
- Moving Media from One Slot to Another
- Ejecting Media from a Slot into an Empty Mailslot
- Ejecting Media from a Drive into an Empty Mailslot
- Restarting Automigration/Replication Services
- Scanning a SAN Destination Library
- Editing the Management URL
- Uploading SAN Destination Library or Tape Drive Firmware
- Deploying SAN Destination Library or Tape Drive Firmware
- Generating a SAN Destination Library Support Ticket
- Generating a SAN Destination Library Drive Support Ticket
- Running a SAN Destination Library Assessment Test
- Running a SAN Destination Library Drive Assessment Test
- Replacing a Library
- LAN/WAN Destination Library Operations
- LAN/WAN Replication Target Operations
- Creating a LAN/WAN Replication Target
- Viewing the Replication Target Slot Details
- Setting the Global LAN/WAN Replication Target Configuration
- Editing a LAN/WAN Replication Target
- Deleting a LAN/WAN Replication Target
- Changing the LAN/WAN Replication Target Password
- Clearing the Source VLS from the LAN/WAN Replication Target
- Automigration/Replication Reporting
- 6 Deduplication
- 7 Operation
- 8 User Interfaces
- 9 Configuration
- Setting the Network Settings
- Setting the User Preferences
- Editing the Default Fibre Channel Host Port Settings
- Managing Oversubscription
- Managing Virtual Device LUNs
- Creating a Virtual Library
- Editing a Virtual Library
- Creating Tape Drives
- Creating Cartridges
- Destroying a Virtual Library
- Destroying a Tape Drive
- 10 Management
- 11 Monitoring
- Status Information in the Status Pane
- Status Icons
- Notification Alerts
- Monitoring Storage Capacity
- Performance and Storage Use Reports
- Clearing All System Faults
- Clearing the Hardware Compression Faults
- Trace Log Files
- 12 CLI Command Set
- 13 Component Identification
- VLS12200 Node Components, LEDs, and Buttons
- Front Panel Components
- Front Panel LEDs and Buttons
- Rear Panel Components
- Rear Panel LEDs and Buttons
- System Board Components
- Accessing the HP Systems Insight Display
- HP Systems Insight Display and LEDs
- HP Systems Insight Display LEDs and Internal Health LED Combinations
- Hard Drive LEDs
- Hard Drive LED Combinations
- Ethernet Switch 2510–24 Components, LEDs, and Buttons
- Ethernet Switch E6600 Components, LEDs, and Buttons
- VLS12200 Node Components, LEDs, and Buttons
- 14 Component Replacement
- 15 Disaster Recovery
- 16 Support and Other Resources
- 17 Documentation feedback
- A Troubleshooting
- B Specifications
- C Regulatory Compliance Notices
- Glossary
- Index