HP Officejet 7000 Wide Format Printer - E809a - Manual (Page 38)

Understand the network configuration status report
The network configuration status report shows the network settings for the device.
1. General Information: Shows information about the current status and connection
type of the network, and other information, such as the URL of the embedded Web
server and the hardware address of the device.
Network Status: This setting can be 'Ready' or 'Offline'. When the setting is 'Offline',
it implies either that the IP is being assigned or negotiated by the DHCP server, or
that the AutoIP or the network is not available.
2. 802.3 Wired: Shows information about your wired network connection, such as the
hostname, IP address, subnet mask, default gateway, and server.
Link Configuration: The possible values are '10T/100T HalfDplx/FullDplx', '10T
HalfDplx', '100T FullDplx', and '100T HalfDplx'.
3. Miscellaneous: Shows information, such as the administrator details.
• mDNS: Shows information about the active Multicast Domain Name System
(mDNS) connection. mDNS services are typically used on small networks for IP
address and name resolution (through UDP port 5353) where a conventional DNS
server is not used.
• SLP: Shows information about the current Service Location Protocol (SLP)
connection. SLP is used by network management applications for device
management. The device supports SNMPv1 protocol on IP networks.
To print the network configuration page from the device control panel
Press the
Network button
Chapter 3
34 Configure and manage