HP Officejet 7000 Wide Format Printer - E809a User Manual
Page 111
Light description/Light pattern
Explanation and recommended
action
The Power light is on, and the Resume light and one or more
ink cartridge lights blink.
One of the following has occurred.
•
One or more of the ink
cartridges are almost
depleted and may results in
poor print quality. Replace the
existing ink cartridges to
avoid poor print quality. To
continue printing using the
existing ink cartridges, press
the (Resume button).
NOTE: Ink level alerts and
indicators provide estimates
for planning purposes only.
When you receive a low-ink
alert, consider having a
replacement cartridge
available to avoid possible
printing delays.
•
One or more of the ink
cartridges are depleted.
Replace the existing ink
cartridges with genuine HP
ink cartridges.
CAUTION: HP cannot
guarantee the quality or
reliability of non-HP supplies.
Product failure or damage
attributable to the use of non-
HP ink cartridge will not be
covered under warranty. If
you believe you have
purchased a genuine HP ink
cartridge, visit To continue printing using the
existing ink cartridges, press
the (Resume button).
You have just installed a new
printhead and the ink in the ink
cartridge is low. There might be
insufficient ink to initialize the
printhead. Make sure the
indicated ink cartridge is properly
installed. If this symptom persists,
replace the indicated ink cartridge
with new ink cartridge or press the
(Resume button) to continue
using the existing ink cartridge.
(continued)
Interpreting control-panel lights
107