HP Officejet 7000 Wide Format Printer - E809a User Manual
Page 108
For more information, visit the HP Web site for the latest
troubleshooting information, or product fixes and updates.
Light description/Light pattern
Explanation and recommended
action
All lights are off.
The device is off.
•
Connect the power cable.
•
Press (Power button).
The Power light is on.
The device is ready.
No action is required.
The Power light blinks.
The device is turning on or off, or
is processing a print job.
No action is required.
The device is pausing for the ink
to dry.
Wait for the ink to dry.
The Power light and the Resume light blink.
Print media is jammed in the
device.
Remove all media from the output
tray. Locate and clear the jam. For
more information, see Clear a jam
in the device.
The device carriage has stalled.
•
Open the top cover and
remove any obstructions
(such as jammed media).
•
Press (Resume button) to
continue printing.
•
If the error persists, turn the
device off, and then on again.
The Power light is on and the Resume light blinks.
The device is out of paper.
Load paper and press
(Resume button).
The media width setting does not
match the media loaded.
Change the media setting in the
print driver to match the media
loaded. For more information, see
Print on special and custom-sized
media
Chapter 5
104
Control-panel lights reference