HP XP P9500 Storage User Manual
Page 238
Table 88 SSB codes that are returned by raidcom modify port -port_speed command (continued)
raidcom modify port -port_speed
Description
Error code
Executing/
Asynchronous
Error message
SSB2
SSB1
The other than "P-to-P (point to point)" cannot be specified when
specifying a topology of the package for Fibre Channel over
Ethernet.
05A7
B955
Executing
CMDRJE
The command device being used at the local RAID Manager
exists under the port.
1039
B955
Executing
CMDRJE
The program product is not installed.
104F
B955
Executing
CMDRJE
Invalid host speed is set for 4Gbps fibre adapter. The available
host speeds are AUTO, 1G, 2G, and 4G only.
113D
B955
Executing
CMDRJE
Invalid host speed is set for 8Gbps Fibre Adapter. The available
host speeds are AUTO, 2G, 4G, and 8G only.
113F
B955
Executing
CMDRJE
The other than "10G" cannot be specified when specifying a
host speed of the package for Fibre Channel over Ethernet.
11A5
B955
Executing
CMDRJE
Table 89 SSB codes that are returned by raidcom modify port -port_attribute command
raidcom modify port -port_attribute
Description
Error code
Executing/
Asynchronous
Error message
SSB2
SSB1
Invalid package
8404
2E00
Executing
CMDRJE
The operation cannot be done because another application, for
example Remote Web Console and SVP, is used.
8001
2E10
Executing
CMDRJE
The specified port is blocked.
8400
2E10
Executing
CMDRJE
There is a pair for Continuous Access Synchronous/Continuous
Access Journal that is used the specified port.
8402
2E10
Executing
CMDRJE
There is a pair for Continuous Access Synchronous/Continuous
Access Journal that is used the specified port.
8403
2E10
Executing
CMDRJE
The storage system is in the state of start-up. Wait for a while,
then retry the operation.
800D
2E11
Executing
CMDRJE
The specified port is not installed.
8400
2E20
Executing
CMDRJE
There is a path for Continuous Access Synchronous/Continuous
Access Journal in the specified port.
8403
2E30
Executing
CMDRJE
There is an external VOL path in the specified port.
8406
2E30
Executing
CMDRJE
There is a path for Continuous Access Synchronous/Continuous
Access Journal in the specified port.
8407
2E30
Executing
CMDRJE
There is a path for Continuous Access Synchronous/Continuous
Access Journal in the specified port.
8408
2E30
Executing
CMDRJE
An LU path has been defined.
8409
2E30
Executing
CMDRJE
An internal error occurred.
84FC
2ED0
Executing
CMDRJE
Call HP Technical Support.
238 Troubleshooting