HP XP P9500 Storage - Manual (Page 206)

Table 50 SSB codes that are returned by raidcom modify port -security _switch command (continued)
raidcom modify port -security _switch
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The other than "fabric on" cannot be specified when specifying
a topology of the package for Fibre Channel over Ethernet. 05A6 B955 Executing CMDRJE
The other than "P-to-P (point to point)" cannot be specified when
specifying a topology of the package for Fibre Channel over
Ethernet. 05A7 B955 Executing CMDRJE
The command device being used at the local RAID Manager
exists under the port. 1039 B955 Executing CMDRJE
The program product is not installed. 104F B955 Executing CMDRJE
Invalid host speed is set for the 4Gbps fibre adapter. The
available host speeds are AUTO, 1G, 2G, and 4G only. 113D B955 Executing CMDRJE
Invalid host speed is set for the 8Gbps fibre adapter. The
available host speeds are AUTO, 2G, 4G, and 8G only. 113F B955 Executing CMDRJE
The other than "10G" cannot be specified when specifying a
host speed of the package for Fibre Channel over Ethernet. 11A5 B955 Executing CMDRJE
Table 51 SSB codes that are returned by raidcom add ldev command
raidcom add ldev
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
It exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
Cannot create because the specified capacity is invalid. 0002 2E00 Executing CMDRJE
SSID is not in the effective range. 0003 2E00 Executing CMDRJE
The value of specified emulation type is invalid. 000D 2E00 Executing CMDRJE
The specified emulation type is not supported in this command. 000E 2E00 Executing CMDRJE
The capacity in the case of specifying a emulation type of the
mainframe series must be dividable by the cylinder. 0019 2E00 Executing CMDRJE
The capacity when 3390-V emulation type is specified must be
divisible by page unit. 001A 2E00 Executing CMDRJE
When you specify emulation type for open system, you cannot
specify the size by the cylinder. 001C 2E00 Executing CMDRJE
A volume for online data migration cannot be created because
the specified value of capacity (LBA) is not the maximum. 0025 2E00 Executing CMDRJE
The capacity must be specified because LDEVs are in the parity
group (or the external volume group). 0026 2E00 Executing CMDRJE
The capacity must be specified. 0027 2E00 Executing CMDRJE
The parity group number or the external group number is not in
the effective range. 0101 2E00 Executing CMDRJE
Failed to restore the LDEV that is created to external volume
group. 1005 2E00 Asynchronous Get Command Status
The specified pool ID is not in the effective range. 6000 2E00 Executing CMDRJE
The specified CLPR number is not in the effective range. 7000 2E00 Executing CMDRJE
206 Troubleshooting