HP XP P9500 Storage - Manual (Page 230)

Table 76 SSB codes that are returned by raidcom modify rcu command
raidcom modify rcu
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
CU# of RCU exceed the effective value. 3001 2E00 Executing CMDRJE
The value of least path number is invalid. 3002 2E00 Executing CMDRJE
The value of RIO MIH time is invalid. 3003 2E00 Executing CMDRJE
The value of Round-trip response time is invalid. 3004 2E00 Executing CMDRJE
Invalid product ID or path registration ID. 3005 2E00 Executing CMDRJE
Incident that is created by CU is not in the one of following: 3007 2E00 Executing CMDRJE
- Incident that is sent to MCU host and RCU.
- Incident that is sent to RCU.
Command cannot be executed because the parameter of
specified RCU is invalid. 3008 2E00 Asynchronous Get Command Status
Command cannot be executed because all the CU numbers in
the RCU is not unified at the path that is specified creation or
deletion. 3009 2E00 Asynchronous Get Command Status
CU number is out of effective range. 7100 2E00 Executing CMDRJE
The operation cannot be done because the microcode is being
changed. 8004 2E11 Executing CMDRJE
The attribute of the RCU cannot be changed because the
specified RCU is not registered. 3001 2E20 Executing CMDRJE
The specified CU number is not defined, or an LDEV is not
defined under the CU number. 7101 2E21 Asynchronous Get Command Status
The operation cannot be done because the number of paths
become less than the least path number. 3101 2E23 Executing CMDRJE
Command cannot be executed because the RCU identification
code of a path is invalid. 3001 2E31 Asynchronous Get Command Status
An internal error occurred. 00EF 2ED6 Executing CMDRJE
Call HP Technical Support.
The value of SSID for the remote DKCstorage system is invalid. 3300 2ED6 Executing CMDRJE
Table 77 SSB codes that are returned by raidcom delete rcu_path command
raidcom delete rcu_path
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The CU# of RCU exceeds the effective value. 3001 2E00 Executing CMDRJE
The product ID or the path registration ID is invalid. 3005 2E00 Executing CMDRJE
Command cannot be executed because the parameter of
specified RCU is invalid. 3008 2E00 Asynchronous Get Command Status
The specified port # on the side of RCU is invalid. 3200 2E00 Executing CMDRJE
CU number is out of effective range. 7100 2E00 Executing/
Asynchronous CMDRJE
Get Command Status
230 Troubleshooting