HP XP P9500 Storage User Manual
Page 204
Table 46 SSB codes that are returned by raidcom disconnect external_grp command (continued)
raidcom disconnect external_grp
Description
Error code
Executing/
Asynchronous
Error message
SSB2
SSB1
Call HP Technical Support.
An internal error occurred by the operation of external volume.
0905
2EDA
Executing
CMDRJE
Call HP Technical Support.
Table 47 SSB codes that are returned by raidcom modify external_grp command
raidcom modify external_grp
Description
Error code
Executing/
Asynchronous
Error message
SSB2
SSB1
The external volume group is not in the effective range.
4100
2E00
Executing
CMDRJE
The specified MP Blade is blocked.
8300
2E10
Executing
CMDRJE
The attribute cannot be changed because Auto LUN is being
executed.
4107
2E11
Executing
CMDRJE
There is no external volume group.
4100
2E20
Executing
CMDRJE
The specified MP Blade is not installed.
8300
2E20
Executing
CMDRJE
Cache mode cannot be changed because there is an LDEV that
Cache Residency bind mode is set.
000C
2E31
Executing
CMDRJE
Cache mode cannot be changed because the specified external
volume includes a pool volume or an LDEV that is used by LUSE.
4101
2E31
Executing
CMDRJE
The cache mode cannot be changed because one of the
following applies to the specified external volume.
4107
2E31
Executing
CMDRJE
•
A pool volume of the pool that consists of both external
volumes and internal volumes.
•
A pool volume of the pool where the multi tier pool option
is enabled.
The attribute of the external volume cannot be changed from
the current cache mode to the specified cache mode.
4108
2E31
Executing
CMDRJE
The attribute cannot be changed because the external volume
group is not mapped for online data migration.
4109
2E31
Executing
CMDRJE
An internal error occurred on the changing of an external volume
option.
0905
2EDA
Executing
CMDRJE
Call HP Technical Support.
Table 48 SSB codes that are returned by raidcom modify port -loop_id command
raidcom modify port -loop_id
Description
Error code
Executing/
Asynchronous
Error message
SSB2
SSB1
The specified AL-PA is invalid.
044C
B955
Executing
CMDRJE
The specified topology is invalid.
054E
B955
Executing
CMDRJE
The other than "fabric on" cannot be specified when specifying
a topology of the package for Fibre Channel over Ethernet.
05A6
B955
Executing
CMDRJE
204 Troubleshooting