HP XP P9500 Storage - Manual (Page 235)

Table 81 SSB codes that are returned by raidcom delete ldev command (continued)
raidcom delete ldev
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The specified LDEV is used as a Continuous Access Synchronous
pair or a Continuous Access Journal pair. 0001 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Compatible FlashCopy pair. 0003 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Snapshot pair. 0004 2E10 Asynchronous Get Command Status
The specified LDEV is used as a system disk. 0008 2E10 Asynchronous Get Command Status
The specified LDEV is used as a CC/XRC attribute device. 0012 2E10 Asynchronous Get Command Status
An LDEV that is in the state of formatting is included in the parity
group of the target LDEV. 0004 2E11 Asynchronous Get Command Status
An LDEV that is in the state of executing quick format is included
in the parity group of the target LDEV. 0005 2E11 Asynchronous Get Command Status
The specified LDEV is used in another operation. 0053 2E11 Executing CMDRJE
The parity group of the target LDEV is in the state of correction
copy. 0102 2E11 Asynchronous Get Command Status
The parity group or the external volume group that the specified
LDEV is belongs to is used in another operation. 0153 2E11 Executing CMDRJE
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool. 6004 2E11 Asynchronous Get Command Status
The operation cannot be done because the internal processing
is in progress. 8004 2E11 Asynchronous Get Command Status
The operation cannot be done because there is blocked part in
the system. 8108 2E11 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
LDEV is not installed. 0000 2E20 Executing CMDRJE
An LU path has been defined. 0007 2E30 Executing CMDRJE
The specified LDEV is used as a Thin Provisioning volume. 000A 2E30 Asynchronous Get Command Status
The specified LDEV is used as a pool volume. 000E 2E30 Asynchronous Get Command Status
Volume Security for Mainframe is set to the specified LDEV. 001A 2E30 Asynchronous Get Command Status
The specified LDEV is a Data Retention/Volume Retention
attribute device. 004E 2E30 Asynchronous Get Command Status
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration. 0074 2E30 Asynchronous Get Command Status
The target LDEV is an ESAM Quorum disk and cannot be
deleted. 0001 2E31 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EE8 Executing CMDRJE
An internal error occurred. 0A18 2EE8 Asynchronous Get Command Status
An internal error occurred.
Call HP Technical Support. FFFB 2EE8 Asynchronous Get Command Status
Error messages and error codes 235