HP XP P9500 Storage - Manual (Page 217)

Table 61 SSB codes that are returned by raidcom modify ldev -ssid command
raidcom modify ldev -ssid
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
SSID cannot be changed because there are LDEVs in the
boundary where the specified LDEV belongs. 0023 2E11 Executing CMDRJE
The specified SSID is used for the other boundary. 7201 2E22 Executing CMDRJE
An internal error occurred. Call HP Technical Support. FEEC 2EE8 Executing CMDRJE
Table 62 SSB codes that are returned by raidcom modify ldev -status nml command
raidcom modify ldev -status nml
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
It exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
The specified LDEV is used as a Business Copy pair. 0000 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Continuous Access Synchronous
pair or a Continuous Access Journal pair. 0001 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Compatible FlashCopy pair. 0003 2E10 Asynchronous Get Command Status
The specified LDEV is used as a Snapshot pair. 0004 2E10 Asynchronous Get Command Status
The specified LDEV is used as a system disk. 0008 2E10 Asynchronous Get Command Status
LDEV is not blocked. 0010 2E10 Executing CMDRJE
The specified LDEV is a CC/XRC attribute device. 0012 2E10 Asynchronous Get Command Status
The specified LDEV is not formatted after it is used as the journal
volume. 001E 2E10 Asynchronous Get Command Status
The operation cannot be done because LDEV is not expanding. 0009 2E11 Asynchronous Get Command Status
The operation cannot be done because the virtual disk space is
blocked. 001E 2E11 Asynchronous Get Command Status
The specified LDEV is used in another operation. 0053 2E11 Executing CMDRJE
The parity group or the external group to which the specified
LDEV belongs is used in another operation. 0153 2E11 Executing CMDRJE
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool volume. 6006 2E11 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The specified LDEV is not installed. 0000 2E20 Executing CMDRJE
The specified LDEV is used as a Thin Provisioning. 000A 2E30 Asynchronous Get Command Status
The specified LDEV is used as a pool volume. 000E 2E30 Asynchronous Get Command Status
The specified LDEV is used as a reserved volume of Auto LUN. 0014 2E30 Asynchronous Get Command Status
Volume Security for Mainframe is set to the specified LDEV. 001A 2E30 Asynchronous Get Command Status
The specified LDEV is a Data Retention/Volume Retention
attribute device. 004E 2E30 Asynchronous Get Command Status
Error messages and error codes 217