HP XP P9500 Storage - Manual (Page 215)

Table 59 SSB codes that are returned by raidcom initialize ldev command (continued)
raidcom initialize ldev
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The parity group of the target LDEV is in the state of correction
copy. 0102 2E11 Asynchronous Get Command Status
The parity group or the external volume group to which the
specified LDEV belongs is used in another operation. 0153 2E11 Executing CMDRJE
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool. 6004 2E11 Asynchronous Get Command Status
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool volume. 6006 2E11 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The processing stopped because aborting processing is required. 0000 2E14 Asynchronous Get Command Status
LDEV is not installed. 0000 2E20 Executing CMDRJE
It exceeds the maximum value of parity group that can be
executed the quick format at a time. 0100 2E22 Asynchronous Get Command Status
The specified LDEV is used as a Thin Provisioning. 000A 2E30 Asynchronous Get Command Status
The specified LDEV is used as a pool volume. 000E 2E30 Asynchronous Get Command Status
The specified LDEV is used as a journal volume. 000F 2E30 Asynchronous Get Command Status
Volume Security for Mainframe is set to the specified LDEV. 001A 2E30 Asynchronous Get Command Status
Quick format cannot be done because the target LDEV is not an
internal volume. 002D 2E30 Asynchronous Get Command Status
The specified LDEV is a Data Retention/Volume Retention
attribute device. 004E 2E30 Asynchronous Get Command Status
The specified LDEV is a pool volume and the pool volume include
the Thin Provisioning volume that is not in the blocked status. 0061 2E30 Asynchronous Get Command Status
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration. 0074 2E30 Asynchronous Get Command Status
Maintenance work cannot be performed because the target
LDEV is a ESAM Quorum disk. 0001 2E31 Asynchronous Get Command Status
LDEV cannot be formatted because there is no normal external
path. 0017 2E31 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EE8 Executing CMDRJE
An internal error occurred. 0A18 2EE8 Asynchronous Get Command Status
An internal error occurred. FEEC 2EE8 Executing CMDRJE
Call HP Technical Support. Asynchronous Get Command Status
The specified parameter is incorrect. Check the HP P9000 RAID
Manager Reference Guide. 0002 2EF3 Executing CMDRJE
Error messages and error codes 215