HP XP P9500 Storage - Manual (Page 229)

Table 75 SSB codes that are returned by raidcom add thp_pool command (continued)
raidcom add thp_pool
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
It cannot be used as a pool volume because the size of specified
LDEV is less than 8GB. 0038 2E30 Asynchronous Get Command Status
The specified LDEV is used as a V-VOL. 005C 2E30 Asynchronous Get Command Status
The specified LDEV is a volume of unsupported Smart Tiers. 005D 2E30 Asynchronous Get Command Status
The specified LDEV is used in another program product. 005E 2E30 Asynchronous Get Command Status
An LDEV, whose emulation type is not available to be mixed,
is in the specified LDEVs. 006C 2E30 Executing CMDRJE
The operation cannot be done for the following reasons: 006E 2E30 Asynchronous Get Command Status
•
The pool volumes to be added to the Smart Tiers pool include
external volumes whose cache modes are invalid.
• The Thin Provisioning pool includes both external volumes
whose cache modes are invalid and internal volumes.
The resource group ID of the specified volume cannot be
registered because the resource group ID is different from the 0071 2E30 Executing
Asynchronous
CMDRJE
Get Command Status
resource group ID of the other pool volume in the specified pool
ID.
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration. 0074 2E30 Asynchronous Get Command Status
The threshold value 1 is out of range. 6000 2E30 Executing CMDRJE
The specified pool attribute differs from the pool attribute of
existed pool. 6004 2E30 Asynchronous Get Command Status
The RAID level of the specified LDEV is different with the RAID
level of others. 0015 2E31 Asynchronous Get Command Status
There is a blocked pool volume. 0016 2E31 Asynchronous Get Command Status
External volumes whose cache modes are different are included. 0018 2E31 Asynchronous Get Command Status
The POOL Name is duplicated with another pool. 6001 2E31 Executing CMDRJE
The pool cannot include volumes in different RAID levels because
the pool cannot include those volumes. Or the pool cannot 6004 2E31 Asynchronous Get Command Status
include the RAID 1 volumes and the volumes of other RAID levels
together.
The pool cannot include both internal volumes and external
volumes because the pool is not set to Mixable. 6005 2E31 Asynchronous Get Command Status
The usage capacity exceeds the license capacity of program
product. 9000 2E31 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EE7 Executing CMDRJE
An internal error occurred. FEEC 2EE7 Executing CMDRJE
Call HP Technical Support. Asynchronous Get Command Status
Error messages and error codes 229