HP XP P9500 Storage - Manual (Page 208)

Table 51 SSB codes that are returned by raidcom add ldev command (continued)
raidcom add ldev
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
LDEV is already defined. 0001 2E22 Executing CMDRJE
It exceeds the range of LDEV# that can be created. 0001 2E23 Executing/ CMDRJE/Get
Command Status
Asynchronous
The specified SSID is already used in another CU. 0020 2E30 Executing CMDRJE
The SSID is allocated to the CU already. 0021 2E30 Executing CMDRJE
An LDEV of another emulation type is allocated in the range
where the number is divided into each 32LDEVs. 0026 2E30 Asynchronous Get Command Status
The emulation type that cannot be mixed with is specified. 004C 2E30 Executing CMDRJE
The specified number of LDEV exceeded the maximum number
that can be created. 004D 2E30 Executing CMDRJE
Exceeded the LDEV capacity that can be created. 0104 2E30 Executing CMDRJE
The location is out of the range that can be specified. 0105 2E30 Executing CMDRJE
Volume whose emulation type is 3390-V cannot be created in
RAID1 parity group. 0106 2E30 Executing CMDRJE
The virtual volume cannot be added because the number of
virtual volumes that can be created in the system exceeded the
maximum number. 4119 2E30 Executing
Asynchronous
CMDRJE
Get Command Status
The specified pool is the pool for Snapshot. 6003 2E30 Executing CMDRJE
Asynchronous Get Command Status
A virtual volume of Thin Provisioning that is associated with the
specified pool cannot be created with the specified emulation
type. 6003 2E31 Executing CMDRJE
TSE-VOL cannot be created because of the following conditions. 6007 2E31 Executing CMDRJE
•
The specified pool is other than THP Z pool.
•
The specified emulation type is other than 3390-A.
TSE-VOL cannot be created in combination with the specified
pool ID and the CU number of LDEV. 6008 2E31 Executing CMDRJE
You must specify the even CU number for the pool of even pool
ID, and the odd CU number for the pool of odd pool ID.
A TSE-VOL cannot be created in the specified pool for Smart
Tiers. 6009 2E31 Asynchronous Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EE8 Executing CMDRJE
An internal error occurred. FFFB 2EE8 Asynchronous Get Command Status
Call HP Technical Support.
The value of the capacity is invalid. - - Executing ERANGE Result too
large
208 Troubleshooting