HP XP P9500 Storage - Manual (Page 222)

Table 68 SSB codes that are returned by raidcom add lun command (continued)
raidcom add lun
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
Another LDEV is already mapped to the specified LUN. 0947 B958 Executing CMDRJE
The value of Host group ID exceeds the maximum. 0956 B958 Executing CMDRJE
The program product is not installed. 0957 B958 Executing CMDRJE
The specified host group is not installed. 0959 B958 Executing CMDRJE
An invalid LDEV exists in the specified LDEVs. 095D B958 Executing CMDRJE
The multiple LDEV cannot be specified. 098C B958 Executing CMDRJE
When the host mode option 60 is set, LUN path of LUN0 cannot
be set or released. 098D B958 Executing CMDRJE
An invalid LDEV exists in the specified LDEVs. 0994 B958 Executing CMDRJE
Table 69 SSB codes that are returned by raidcom modify pool command
raidcom modify pool
Description Error code Executing/
Asynchronous Error message
SSB2 SSB1
The value of pool ID is invalid. 6000 2E00 Executing CMDRJE
The specified pool is for Snapshot. 6001 2E00 Executing CMDRJE
The value of maximum reserve ratio is out of range, or it falls
below the maximum reserve ratio of the V-VOL. 6002 2E00 Executing CMDRJE
The specified Tier Range value is invalid. 6003 2E00 Executing CMDRJE
Relations between the specified lower limit of Tier Range and
the Delta value is invalid. 6004 2E00 Executing CMDRJE
The specified Tier capacity threshold value is out of range. 6006 2E00 Executing CMDRJE
The threshold of the specified High water mark is out of range. 6009 2E00 Executing CMDRJE
The operation cannot be done because the specified threshold
of Warning is larger than the threshold of the specified High
water mark. 600A 2E00 Executing CMDRJE
The operation cannot be done because the total capacity of
virtual volumes for Smart Tiers in the system exceeds the
maximum. 001F 2E10 Executing CMDRJE
The specified tier number is out of range. 6100 2E00 Executing CMDRJE
The specified pool is in the state of blocked. 600B 2E10 Executing CMDRJE
The setting of the threshold value is less than the pool usage
value. 600C 2E10 Asynchronous Get Command Status
The operation cannot be done because it is in the state of
shrinking. 600D 2E10 Executing CMDRJE
The operation cannot be done because it is being discarded
pages. 6011 2E10 Executing CMDRJE
Pool cannot be restored because the usage rate of pool is 100%. 6012 2E10 Asynchronous Get Command Status
222 Troubleshooting