HP Insight Management-Software - Manual (Page 53)

set iscsi-connection
The –set iscsi-connection command modifies the properties of a specified iSCSI connection.
Syntax
-set iscsi-connection –profilename
-portnumber
[-network ]
[-speedtype ]
[–speed ]
Parameters
Table 20 Parameter descriptions for –set iscsi-connection
Optional Required Description Parameter
x Specifies the profile for the
iSCSI connection. -profilename
x Specifies the port number for
the iSCSI connection. -portnumber
x Specifies the name of an
existing network to associate -network
with the iSCSI connection. If
the network name is not
specified, the network is
unassigned and can be
assigned later.
set iscsi-connection 53