HP Insight Management-Software - Manual (Page 35)

Table 11 Parameter descriptions for -set enet-connection (continued)
Optional Required Description Parameter
x Specifies the requested
operational speed for the -speedtype
server port. Valid values
include auto, preferred,
and custom. Default value
is preferred. The
following list describes the
speed type:
•
auto —Allocates the
maximum port speed,
constrained by the
maximum configured
speed for the network.
•
preferred —Ensures
that the speed of the
network matches the
preferred speed of the
network to which the
connection is associated.
NOTE: If no preferred
speed is configured, the
network speed defaults to
auto
.
•
custom —Configures
any speed from 100 Mb
to the maximum
configured speed for the
network in 100 Mb
increments.
•
disabled — the server
port is disabled.
x
IMPORTANT: The -speed
parameter is required only
if the speed type is set to
custom
.
Specifies the user-defined
speed for the server port.
Valid values include 100
Mb to the maximum
configured speed for the
network in 100 Mb -speed
increments. The value needs
to be an integer from 100
to the maximum speed.
Output
The function returns the result of the set operation or a jobid if –nb is specified.
Examples
•
Change the associated multicast filter network of an Ethernet connection:
vcemcli -set enet-connection -profilename MyProfile2 -Network
NewNetworkName -MCastFilter MyMCastFilter
•
Change the associated Multicast Filter Set network of an Ethernet connection:
vcemcli -set enet-connection -profilename MyProfile2 -Network
NewNetworkName -MCastFilterSet MyMCastFilterSet
set enet-connection 35