HP StorageWorks 500 G2 Modular Smart Array - Manual (Page 50)

50 HP StorageWorks MSA500 G2 Storage System User Guide
Removing hard drive blanks
CAUTION: To prevent improper cooling and thermal damage,
do not operate the storage system unless all bays are populated with
either a component or a blank.
To remove the component:
To replace the blank, slide the blank into the bay until it locks into place.
Installing hot-plug SCSI hard drives
1. Remove the existing hard drive blank or hard drive from the drive bay
("Removing hard drive blanks" on page 50 ).